_400px.webp){kind=logo}
Taping Knife
- FULL SOFT-GRIP HANDLE | Lightweight, comfortable and ergonomically designed for all-day use with minimal fatigue. Glass reinforced nylon core. Impact and solvent resistant. Double riveted to the blade using stainless steel rivets.
- PROFESSIONAL GRADE | Designed and built using nearly 20 years of input from professional finishers. Our tools are meant for reliable, daily use on the job site.
- FULL SOFT-GRIP HANDLE | Lightweight, comfortable and ergonomically designed for all-day use with minimal fatigue. Glass reinforced nylon core. Impact and solvent resistant. Double riveted to the blade using stainless steel rivets.
- PROFESSIONAL GRADE | Designed and built using nearly 20 years of input from professional finishers. Our tools are meant for reliable, daily use on the job site.
LEVEL5 Blue Steel Drywall Taping Knives provide outstanding flex, feel and work-ability. These are lightweight workhorse drywall knives which offer premium build quality, precision results and fast application rates.
DESIGN FEATURES
- Premium blue steel blade with precision flex for a smoother finish.
- Wider, thicker and stronger blade in comparison with competitive models.
- Lightweight soft-grip handle ergonomically designed for all-day use.
- Alloy-Metal hammer end for setting drywall nails.
- All LEVEL5 hand tools feature large hang holes.
Care Instructions
High Carbon Steel and Blue Steel blades are often preferred by finishing professionals because they provide outstanding flex, feel and work ability. However, unlike stainless steel, they will oxidize/rust without proper care between uses. We recommend that the knives be cleaned thoroughly then lightly coated with WD-40 or a similar product prior to storage. The knives should also be stored upright while they are drying, to ensure water doesn't collect near the handle.
As an alternative option, we offer most of the same knife configurations with stainless steel blades for easier care and convenience (but a slightly stiffer feel).
PLEASE NOTE - On all of our carbon steel and blue steel finishing knives, we apply a thin, temporary protective lacquer finish to the blades; this provides protection from any minor oxidization between the factory through to the end user. The lacquer wears off quickly during the first few uses. However, if you would like to lightly sand it off, we suggest using 220 grit or finer sand paper. Be very careful - if you sand too aggressively, you may introduce grooves into the blade edge which can then appear in the mud finish.
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur.
Block quote
Ordered list
- Item 1
- Item 2
- Item 3
Unordered list
- Item A
- Item B
- Item C
Bold text
Emphasis
Superscript
Subscript
1-Year Warranty
100% Satisfaction Guaranteed
LEVEL5 makes workhorse drywall finishing tools that set the standard for quality & reliability.
We back all of our tools with the strongest warranties in the industry and work hard to provide our family of finishers with the best customer service possible.
Do you have questions about your LEVEL5 Tool(s)? Call our toll-free support line at 866.562.4229 (local: 913.631.0804) or send us an email at support@level5tools.com. Our support team is available Monday through Friday, 8am to 3:30pm Central Time.
Manufacturer's Warranty
For its full line of skimming blades, handles and accessories, LEVEL5 Tools, LLC. ("LEVEL5") provides a full one (1) year warranty to the original owner that these products will be free from defects in material and function. This warranty is valid in all countries/markets.
Terms & Conditions
- The Warranty applies to the original owner and is not transferable.
- The Warranty is limited to repair or replacement of the product, and does not cover direct, indirect, consequential, incidental or any other type of damage resulting from its use.
- The Warranty does not cover normal wear, misuse, negligence, fire, theft, loss or intentional damage.
- All shipments to the LEVEL5 facility must be freight paid. LEVEL5 reserves the right to determine whether to repair or replace any product covered under the Warranty. Discontinued products may be replaced with newer models when necessary.
OVERVIEW
LEVEL5 Blue Steel Drywall Taping Knives provide outstanding flex, feel and work-ability. These are lightweight workhorse drywall knives which offer premium build quality, precision results and fast application rates.
DESIGN FEATURES
- Premium blue steel blade with precision flex for a smoother finish.
- Wider, thicker and stronger blade in comparison with competitive models.
- Lightweight soft-grip handle ergonomically designed for all-day use.
- Alloy-Metal hammer end for setting drywall nails.
- All LEVEL5 hand tools feature large hang holes.
HOW TO USE
Care Instructions
High Carbon Steel and Blue Steel blades are often preferred by finishing professionals because they provide outstanding flex, feel and work ability. However, unlike stainless steel, they will oxidize/rust without proper care between uses. We recommend that the knives be cleaned thoroughly then lightly coated with WD-40 or a similar product prior to storage. The knives should also be stored upright while they are drying, to ensure water doesn't collect near the handle.
As an alternative option, we offer most of the same knife configurations with stainless steel blades for easier care and convenience (but a slightly stiffer feel).
PLEASE NOTE - On all of our carbon steel and blue steel finishing knives, we apply a thin, temporary protective lacquer finish to the blades; this provides protection from any minor oxidization between the factory through to the end user. The lacquer wears off quickly during the first few uses. However, if you would like to lightly sand it off, we suggest using 220 grit or finer sand paper. Be very careful - if you sand too aggressively, you may introduce grooves into the blade edge which can then appear in the mud finish.
SPECIFICATIONS
Warranty Information
1-Year Warranty
100% Satisfaction Guaranteed
LEVEL5 makes workhorse drywall finishing tools that set the standard for quality & reliability.
We back all of our tools with the strongest warranties in the industry and work hard to provide our family of finishers with the best customer service possible.
Do you have questions about your LEVEL5 Tool(s)? Call our toll-free support line at 866.562.4229 (local: 913.631.0804) or send us an email at support@level5tools.com. Our support team is available Monday through Friday, 8am to 3:30pm Central Time.
Manufacturer's Warranty
For its full line of skimming blades, handles and accessories, LEVEL5 Tools, LLC. ("LEVEL5") provides a full one (1) year warranty to the original owner that these products will be free from defects in material and function. This warranty is valid in all countries/markets.
Terms & Conditions
- The Warranty applies to the original owner and is not transferable.
- The Warranty is limited to repair or replacement of the product, and does not cover direct, indirect, consequential, incidental or any other type of damage resulting from its use.
- The Warranty does not cover normal wear, misuse, negligence, fire, theft, loss or intentional damage.
- All shipments to the LEVEL5 facility must be freight paid. LEVEL5 reserves the right to determine whether to repair or replace any product covered under the Warranty. Discontinued products may be replaced with newer models when necessary.
%20(1).webp){kind=logo}
